ModWood is a type of composite decking material that is known for its durability and low maintenance requirements. However, like any outdoor surface, ModWood can accumulate dirt, grime, and other debris over time, which may diminish its appearance and performance. Regular cleaning is necessary to keep ModWood looking pristine and prolong its lifespan. In this guide, we will provide you with step-by-step instructions on how to effectively clean ModWood, along with some useful tips and precautions.
Materials and Tools You Will Need
Before you start cleaning your ModWood decking, make sure you have the following materials and tools on hand:
- Broom or brush
- Garden hose with a spray nozzle
- Bucket
- Mild detergent or deck cleaner (check manufacturer’s recommendations)
- Soft bristle brush or deck scrubber
- Rubber gloves
- Safety goggles
- Protective clothing
- Plastic sheet or tarp (optional)
Step 1: Clear the Deck
Before you begin the cleaning process, remove all furniture, planters, and other items from your ModWood deck. Sweep away any loose debris such as leaves, twigs, and dirt. If you have stubborn debris stuck between the deck boards, you can use a putty knife or a plastic scraper to gently loosen and remove it.
Step 2: Rinse the Deck
Next, thoroughly rinse the entire ModWood deck with a garden hose equipped with a spray nozzle. Use a medium to high-pressure setting to remove surface dirt, dust, and loose particles. Make sure to rinse the deck boards, railings, and all other surfaces, paying extra attention to areas that are prone to buildup, such as around planters and under furniture.
Step 3: Prepare the Cleaning Solution
Fill a bucket with water and add a mild detergent or a deck cleaner that is recommended by the manufacturer. Follow the manufacturer’s instructions for the correct dilution ratio. Avoid using harsh chemicals or abrasive cleaners, as they can damage the ModWood surface.
Step 4: Scrub the Deck
Dip a soft bristle brush or a deck scrubber into the cleaning solution and scrub the ModWood deck boards in a circular motion. Pay special attention to stained or soiled areas, and use extra pressure if needed. Avoid using wire brushes or abrasive scrubbers, as they can scratch the ModWood surface.
Step 5: Rinse Thoroughly
After scrubbing, rinse the entire deck thoroughly with a garden hose to remove the cleaning solution and any loosened dirt. Make sure to rinse all surfaces, including the deck boards, railings, and any other ModWood components. Use a high-pressure setting to ensure that all residue is completely removed.
Step 6: Dry the Deck
Allow the ModWood deck to air dry completely before placing back any furniture or other items. Avoid direct sunlight, as it can cause the deck boards to dry too quickly and potentially result in warping or cracking. Depending on the weather conditions, it may take several hours to a few days for the deck to dry completely.
Tips and Precautions
- Always wear rubber gloves, safety goggles, and protective clothing when cleaning ModWood to protect your skin and eyes from the cleaning solution and debris.
- Test the cleaning solution on a small, inconspicuous area of the deck before applying it to the entire surface to ensure that it does not cause any discoloration or damage.
- Avoid using pressure washers on ModWood, as the high pressure can damage the surface and strip away the protective coating.
- Clean up any spills or stains on your ModWood deck as soon as possible to prevent them from setting in and becoming harder to remove.
- Do not use bleach or chlorine-based cleaners on
Melbourne Cleaning Club covers all cleaning services near Narre Warren VIC 3805
Melbourne Cleaning Club
19 Ashcroft Cl
Hallam VIC 3803